SRS Image Series workflow > Acquire >
11. Image acquire
Acquisition List
The list displays the Section number, contour Region, and Status of the image to be acquired.
Acquisition
Click the Go (blue arrow) button to start acquiring; to stop at any point, click the Stop (red square) button. When the acquisition is complete, Acquire Results appears.
Time delay before acquiring each image
Enter the necessary time delay before acquiring each image in milliseconds (500 ms is the default); recommended if there are concerns about vibration.
Multichannel Acquire (available for fluorescent tissue)
- Check Multichannel Acquire.
- Click Multichannel Setup (see Multichannel setup).
To use the Multichannel Setup, device command sequences must already be defined.
Diagnostic Mode
Turns on the diagnostic record and error list generated by the software; this is useful to keep off if you are running low on memory or space on your computer.
Acquire Results
- To move on to the next slide, click Next Slide.
- If you are finished, click I’m Done.