Slide Loader setup workflow

Requires a separate license

To use the slide loader, click Acquire > Workflows > Slide Loader.

 

The workflow guides you through 15 steps:

1. Initialize hardware

2. Load representative slide

3. Select auto-contour magnification

4. Select auto-contour acquisition type

5. Adjust auto-contour camera settings

6. Auto-contour scan region

7. Adjust auto-contour settings

8. Select magnification

9. Select acquisition type

10. Adjust camera settings

11. Define acquisition settings

12. Remove slide from stage

13. Specify output

14. Select slides to acquire

15. Start acquiring

 

Also see Slide scanning workflow