Use External Image Source

If your system is configured to drive a confocal microscope, use the Use Laser for Acquires command instead.

Use this command when you plan on loading images from an external image source.

This command indicates to the system that you are NOT using the image size associated with the camera configured for the system; the live image mode is automatically turned off.

Prerequisites

You are controlling the stage.
You have already entered the dimensions of the external image source via External Image Source Setup.

Click Acquisition>Use External Image Source to enable the command .
Acquire the image.

Stereo Investigator applies the settings defined via External Image Source Setup.

The display of the acquired image is turned off so that you can maintain control of the stage. Use Synchronize Stage and Images to display the image.