Display preferences: Grid

Displays a rectangular grid; its size is defined by Grid Spacing.

Displays grid at maximum brightness. Use when the slide illumination levels are high. The default is medium brightness.

 Displays grid when an aerial viewing mode is selected. Disable this option if the grid display is too dense when using Go To or Where Is.

Displays the coordinates of the grid.

• A0 is the coordinate of the reference point.
• Letters go in alphabetical order to the right of the reference point, and numbers increase below the reference point.
• Grid intersections to the left of the reference point are listed with negative letters.
• Intersections above the reference point are listed with negative numbers.

Sets the dimensions of the grid.

• When you change the objective from one magnification to another, the grid changes size accordingly.
• At low magnifications, the grid can become so dense that the entire screen is covered with nothing but grid lines. The program prevents this by automatically turning off the grid when the spacing between grid lines drops below 4 pixels.