Serial Section Manager

1775 (in the Serial Section Setup window)

Purpose

We need a general description of what the serial section manager is

Use the Serial Section Manager to define the key parameters (i.e., initial section thickness, Z position, etc.) for each section.

Adding or inserting new sections

  1. Open the Serial Section Manager by clicking its icon from the Workspace ribbon.

  2. In the Serial Section Manager window, click one of the following:

    • New section: Add the first serial section or add a new section to the bottom of the list.

      • A new section is added to the bottom of the list if there are existing sections in the Serial Section Manager.

      • The Serial Section Setup window is displayed if you are adding the first serial section.

        1. Under Section Information, enter / modify the requested information.

        2. Select Added or Subtracted to indicate how new sections are handled.

          When you focus down through a section, the depth value increases in the negative direction. For example, if sections are 10 µm thick, and the top of the section is at a depth of 0, the bottom of the section is at a depth of −10 µm.

        3.  

        4. Click OK to complete the setup.

    • Insert Section: Add a section at a specific Z-location to the existing list.

      The Add New Section window opens:

      1. Enter/modify the requested information; the value entered as the Top of Section Depth determines the Z location of the new section.

      2. Focus on the top of the section and click OK to add the new section.

Once the first section (or series of sections) has been defined, New section automatically adds a new section to the end of the section list using the parameters specified previously in Serial Section Setup.

Tools and settings reference

Section Z column

  • Displays the depth value associated with each section. This is usually the Z coordinate for the top of the section.

  • Data contained within a section is not restricted to the Z range of that particular section.

  • Data points placed in a section can have any Z value, but generally the data make more sense if you restrict the Z values to those contained within the section.

Section Name column

  • Displays the name assigned to each section; either the default name, or the name you assign.

Data Present column

  • Displays contours and markers added to each section.

Toolbar button functions

New section

Add a new section at the bottom of the list.
Insert section

Insert a section at a specific Z position relative to existing sections.

Edit section

Edit the properties of the selected section.
Select by section

Select all objects in the current section.
Show current section

Display the currently selected section only.
Gray other sections

Display objects not in the current section as gray

  1. Click Show current section to enable this command.
  2. Click Gray other sections.
Show flanking sections

Display the sections immediately above and below the current section as gray (e.g., if section 9 is active, sections 8 and 10 are displayed as gray and section 9 is shown in color).

  1. Click Show current section to enable this command.
  2. Click Show flanking sections.
Delete section

Delete the currently selected section. The locations of the other sections are not changed with the deletion of a section.
Delete all other sections

Delete all sections except the currently selected section.

There is no Undo function for this operation.